DEGREASER DETERGENT FOR DIFFICULT CLEANING OPERATIONS
CONCENTRATED FORMULA (22% ACTIVE INGREDIENTS)
NSF A1 CERTIFIED FOR THE FOOD INDUSTRY (IAA)
CAN BE USED ON ANY SURFACE, FLOOR, STRUCTURE, EQUIPMENT
INCLUDING PRODUCTION LINES, FERMENTATION CHAMBERS (VAT ROOM),
PACKAGING UNITS AND CONVEYOR ASSEMBLIES
WETTING ABILITY, DEGREASER, DESCALER, POWERFUL
 |
|
|
.jpg)
Satisfies Commission Recommendation (EU) 2017/84
of 16 January 2017 on the monitoring of mineral oil hydrocarbons in food
Analys report available on request
21/009485 LC GC-FID DIN/EN 16995
DESCRIPTION
BIOCLEAN AL HP is a highly concentrated alkaline detergent developed for intensive cleaning operations within various industrial environments. The detergent can be used to eliminate all types of animal, vegetable or mineral matter.
BIOCLEAN AL HP is particularly well-suited for the removal of organic products such as fats, including light or heavy hydrocarbons and can be applied during routine cleaning of workshop floors, structures, drilling platforms, storage areas and as part of emergency clean-ups following an industrial process or during accidental spillage.
BIOCLEAN AL HP contains a powerful cleaning and descaling agent to remove inorganic particles as well as any combustion residue. The detergent can be used to clean the boiler fire-sides or to remove liquid inks, notably flexographic inks.
USAGE GUIDE
BIOCLEAN AL HP can be used from 2% to 20% strength, diluted with mains water, taking into account the nature of the pollutants and the degree of pollution.
Can be used with a cloth, brush, or spray with a low or high pressure rinse or within a sweeping (brush driven) machine.
BIOCLEAN AL HP can also be used in ultrasound machines
PHYSICO-CHEMICAL PROPERTIES TYPICALS
| PROPERTIE |
STANDARD OR METHOD |
VALUE |
UNITS |
|
Aspect |
Visual |
Fluid, clear |
- |
|
Color |
Visual |
pink |
- |
|
Perfume / Odour |
olfactory |
very low, without flavor |
- |
|
Density at 25°C |
NF EN ISO 12185 |
1,030 |
g/l |
|
Content of active materials |
- |
22 |
% p/p |
|
Pure pH |
NF T90-008 |
12,8 |
- |
|
pH at 10% |
NF T90-008 |
10,8 |
- |
|
pH at 5% |
NF T90-008 |
10,6 |
- |
|
flow time cup 3 |
NF T EN ISO 2431 |
22 |
sec. |
|
Refractive index |
ISO 5661 |
1,351 |
rapport |
|
Tension in 20°C in 5 % |
ISO 6295 |
30,5 |
Dynes/cm |
|
Freezing point |
ASTM D 97 |
-11 |
°C |
|
Foaming to 25% |
NFT 60188 |
1/1000/500/0/250 |
mn/ml/l.h-1 |
|
Oil content |
LPCH |
0 |
% |
|
Solvent content |
LPCH |
0 |
% |
|
Phosphate Content |
CPG |
0 |
% |
|
Chlorine content |
CPG MS |
0 |
% |
|
Heavy metals and metalloids content |
CPG MS |
0 |
ppm |
|
DCO Chemical demand for O2 |
NFT 90101 |
7420 |
mgO2/l |
|
Dth0 theoretical O2 demand |
ISO 15705 |
8033 |
mgO2/l |
|
DBO 5 biological O2 demand after 5 days |
NF EN 1899-1 |
1350 |
mgO2/l |
|
MesT materials total suspension |
NF EN 872 |
<2 |
mg/l |
|
MVS volatile suspended solids |
|
<0,2 |
mg/l |
|
Kjeldahl nitrogen (NTK) |
NF EN 25663 |
475 |
mgN/l |
|
Wetting power |
- |
.. |
Quotation |
|
Dispersing power |
- |
... |
Quotation |
|
Emulsifying power |
- |
.. |
Quotation |
|
Degreasing power |
- |
... |
Quotation |
|
Desincrustant power |
- |
... |
Quotation |
PRECAUTION FOR USE
Carry out a preliminary test on the surfaces covered with slightly reticulated paintings.
Do not reject in the sewerage system after use.
Do not expose to freezing.
BIOCLEAN AL HP employed pure, can dull in time, inorganic glasses.
Do not use on super polished light alloys, with a concentration higher than 5% in water.
PRESENTATIONS
|
IBC GRV 1000 kg
|
Drum 200 kg
|
Container 20 kg
|
Looking for another product?
|
Discover our entire IAA range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 